by Sean Fox
August 13, 2024
We're happy to announce that we now make custom hitch mounted swing out tire carriers for any vehicle in house for our local customers! Customize i...
Posted in
4Runner ,
80 Series ,
Custom Fabrication ,
GX470 ,
Land Cruiser ,
Lexus ,
One of Everything ,
Overland ,
Quigly Van ,
Tacoma ,
Toyota ,
Truck ,
Van
by Sean Fox
February 15, 2024
This was one of the first custom bumper projects we had worked on and one of the first real uses of our tubing bender. Custom bumper made comp...
by Sean Fox
March 5, 2023
We had a customer bring their 1946 CJ2A to upgrade to a new customer steering setup. We swapped a manual steering box out of a 1970s CJ7 and fabricated a customer steering linkage to get the old gal back on the road.
by Sean Fox
February 12, 2023
A one of everything build on a gigantic 2014 Ram Power Wagon
by Sean Fox
February 12, 2023
We take a stock JK and build it into a one of a kind show Jeep
by Sean Fox
February 12, 2023
We swap a manual transfer case from an FJ cruiser into a 2WD 2nd Gen Toyota Tacoma and make it look factory.
by Sean Fox
January 22, 2023
We set up a Jeep JLU 4xe to be flat towed behind a motorhome.
by Sean Fox
January 22, 2023
We build a brand new frame for this Jeep YJ.
by Sean Fox
January 22, 2023
We build Nightingale for our favorite VIP
by Sean Fox
January 22, 2023
We built a custom square spiral staircase for a customer so they could stack two shipping containers on top of each other.
by Sean Fox
January 22, 2023
If your frame is rotting out from under you, don't worry we can help.
by Sean Fox
January 22, 2023
If it involves your axles, chances are we have done it before and would be happy to help you with yours.
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
We're happy to announce that we now make custom hitch mounted swing out tire carriers for any vehicle in house for our local customers! Customize i...
This was one of the first custom bumper projects we had worked on and one of the first real uses of our tubing bender. Custom bumper made comp...
We had a customer bring their 1946 CJ2A to upgrade to a new customer steering setup. We swapped a manual steering box out of a 1970s CJ7 and fabricated a customer steering linkage to get the old gal back on the road.
We swap a manual transfer case from an FJ cruiser into a 2WD 2nd Gen Toyota Tacoma and make it look factory.
We built a custom square spiral staircase for a customer so they could stack two shipping containers on top of each other.
If it involves your axles, chances are we have done it before and would be happy to help you with yours.
